Our Products

Developed as an upgrade to the GWS Electric Slow Stick R/C Park Flyer, the SSX replaces the floppy styrofoam wing and tail of the GWS Slow Stick with a more robust balsa-constructed design, consisting of a fully symmetrical aerobatic wing complete with ailerons, and a tail  with rudder and elevator.  Kit can be built as a straignt-wing or dihedral wing X-Trainer.

Maximum Flying Weight: 23 1/2 oz.
Wing Span: 42 x 12 in.
Wing Area: 504 sq. inches (3.5 sq. ft)
Wing Loading: 6.71 oz./ sq. ft. 

Special features of this kit include plug-in wings with carbon wing tubes to make transporting the model a breeze!

Flying Weight: 38 oz. (with recommended setup)
Wing Span: 42"
Wing Area: 954 sq. inches (6.63 sq. ft.)
Wing Loading: 5.74 oz./ sq. ft.
Length: 39" 

 Slow Stick X™ - X-Trainer™ Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section.  Hardware and instructions which are included in "Short Kit" are not included in this repair kit (instructions may be downloaded from Millennium R/C website).  

The MICRO SSX™ is Millennium R/C's mini version of the Slow Stick X.  Allows the building hobbyist to build his own airframe and cover it in his choice of covering.   This fun-to-fly aerobatic electric R/C airplane can be taken anywhere!

Flying weight: 4 1/2 - 5 1/4 oz. (with recommended setup)
Wing Span: 21 1/2"
Wing Area: 120 sq. inches
Wing Loading: 6.33 oz./ sq. ft.
Length: 18"

The MICRO SSX™ BIPLANE has the same wing span and length as the original  MICRO SSX™, and is similar in that it is aerobatic and can handle wind fairly well, but the biplane is capable of sustaining slower flight due to its lower wing loading.  

Flying weight: Approx. 6 1/2 oz. (with recommended setup)
Wing Span: 21 1/2"
Wing Area: 240 sq. inches
Wing Loading: 3.6 oz./ sq. ft.
Length: 18"

CURRENTLY DISCONTINUED. Will be replaced with a new version in the future.

This highly maneuverable, fun-to-fly and versatile plane can be flown as a sport plane or a 3-D plane.  Level 3 Building Difficulty (Advanced). 

Flying Weight:  Under 7 oz. (with recommended setup

Wing Span:  22 in.

Wing Area: 132 sq. in.

Wing Loading: 7.63 oz./sq. ft.

Length: 19.5"

High-quality X-Fuse™ fuselage system for 10mm square stick airplanes such as the GWS Slow Stick, the Slow Stick X™ and the X-Trainer™ .

Made of strong and lightweight ABS plastic and available in a variety of colors, with or without the optional steerable nose/tail gear kit.

Plastic-only repair kit also available.

Designed for our Slow Stick X™, X-Trainer™ or the GWS Slow Stick, but also adaptable to several other R/C models, as it can be mounted to a stick fuselage or adapted using the included adjustable mount to fit almost many other light model airplanes. Provides more stability and strength than the original GWS wire Slow Stick landing gear, thus improving the taxiing and landing experience. Has the advantage of being easily field-repairable with replaceable carbon struts.

High-quality outrunner motor mount made of ABS plastic reinforced with Fiberglass for extra rigidity and reduced motor vibration.  Provides a strong, affordable and lightweight solution for mounting your outrunner motor to any 10mm x 10mm stick. Works with a wide selection of outrunners and includes (4) 3mm x 4mm screws to easily mount the motor. Mounting holes are slotted to allow a fit for a variety of motors. 

Also available as six-pack (plastic only) for a discount.